Tilting TV Wall Mount

The Mount-It! Tilting TV Wall Mount (MI-311) delivers a wider tilt range than most low-profile mounts — 7 degrees upward and 11 degrees downward — with quick-release cords that let you lock and unlock the tilt position without tools. A ±3° post-installation leveling adjustment ensures your TV is perfectly level after mounting, even if the wall isn’t. At 1.97 inches from the wall, the mount maintains a clean, low-profile look while giving you the angle control needed to reduce glare from windows or overhead lighting. Designed for 42–80″ flat panel TVs up to 110 lbs, with VESA compatibility from 100×100 to 900×400 mm across 12 standard patterns. The 25.4″ x 7.87″ wall plate supports dual stud installation at 16″ or 24″ on-center spacing.

Key Specifications

• Compatible TV Sizes: 42″ – 80″ flat panel TVs
• Weight Capacity: Up to 110 lbs
• VESA Compatibility: 100×100 mm to 900×400 mm (12 standard patterns)
• Tilt: 7° upward / 11° downward
• Screen Leveling: ±3° (post-installation adjustment)
• Profile Depth: 1.97″ from wall
• Movement: Tilting
• Mechanism: Static with quick-release cords
• Wall Plate: 25.4″ x 7.87″
• Stud Type: Dual stud
• Stud Spacing: 16″ or 24″ on-center
• Corner Installation: Not supported
• Material: Heavy-duty steel
• Installation Difficulty: Easy

Compatible Installation Surfaces

• Wood studs (drywall over studs)
• Metal studs (drywall over metal studs)
• Solid wood wall (planks, beams, timber)
• Plywood backing wall
• Brick (solid brick)
• Brick veneer
• Concrete block (CMU / cinder block)
• Concrete (poured concrete)
• Tile over studs (tile on backer board over studs)
• Tile over masonry (tile on concrete or block)

Ideal For

• Living rooms and bedrooms with 55–80″ TVs where glare reduction or elevated placement requires tilt
• Home theaters and offices where post-installation leveling adjustment is important
• Installations with 16″ or 24″ stud spacing requiring dual stud support
• Any setup where a fixed mount isn’t enough but full articulation isn’t needed
• Large-screen TVs requiring a wider tilt range than standard low-profile tilt mounts

TV Brand Compatibility

Compatible with VESA-standard flat panel TVs from Samsung, LG, Sony, TCL, Vizio, Hisense, and other major brands within the supported size (42–80″), weight (up to 110 lbs), and VESA pattern (100×100–900×400) range.

What’s in the Box

• Tilting TV wall mount
• Mounting hardware
• Bubble level
• User manual

Installation

• Estimated install time: ~45 minutes
• Difficulty: Easy
• Stud type: Dual stud
• Stud spacing: 16″ or 24″ on-center
• Tools required: Stud finder, power drill, drill bits (wood bits for studs or masonry bits for concrete), level, measuring tape, screwdrivers or socket wrench